Epson XP-970 Waste Ink Counter Reset

The Epson XP-970 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson XP-970 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson XP-970 Ink Pad Counter Warning?

Most Epson XP-970 waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.

Three Steps to Restore Epson XP-970 Printing

1. Langkah 1: Prepare a Windows PC + USB cable and connect Epson XP-970 directly. Keep Internet enabled for validation.
2. Langkah 2: Buka Wic Reset Connect with admin privileges and verify device recognition for Epson XP-970.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson XP-970 to finalize.

Most Epson XP-970 waste counter resets finish in ~1–2 minutes.

Sebelum Anda Mulai

• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Koneksi Internet stabil selama pengaturan ulang
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Windows 7/8/10/11 PC

Jika Printer Tidak Terdeteksi

• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Jalankan aplikasi sebagai Administrator.