Epson XP-215 Waste Ink Counter Reset

The Epson XP-215 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-215 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson XP-215 Show ‘Service Required’?

Most Epson XP-215 waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.

Three Steps to Restore Epson XP-215 Printing

1. Langkah 1: Connect Epson XP-215 to a Windows computer with a stable Internet connection using a USB cable.
2. Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson XP-215 is detected.
3. Langkah 3: Masukkan tombol atur ulang dan tekan Atur ulang. Wait ~1–2 minutes, then restart Epson XP-215.

Most Epson XP-215 waste counter resets finish in ~1–2 minutes.

Apa yang Anda Butuhkan

• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Windows 7/8/10/11 PC
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Koneksi Internet stabil selama pengaturan ulang

Pemecahan masalah

• Jalankan aplikasi sebagai Administrator.
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Tutup Epson Status Monitor atau utilitas printer lainnya.

Pertanyaan yang Sering Diajukan