Epson XP-214 Waste Ink Counter Reset

When the Epson XP-214 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson XP-214 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson XP-214 Show ‘Service Required’?

Dengan Wic Reset Connect, you can reset the Epson XP-214 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Gejala Umum

• Printer menolak untuk mencetak meskipun tinta tersedia
• Monitor Status Epson menunjukkan peringatan pemeliharaan
• Lampu berkedip dan pekerjaan terhalang
• Perangkat terkunci hingga pengaturan ulang dilakukan

Reset Epson XP-214 Waste Ink Counter in 3 Steps

1. Langkah 1: Connect Epson XP-214 to a Windows computer with a stable Internet connection using a USB cable.
2. Langkah 2: Buka Wic Reset Connect with admin privileges and verify device recognition for Epson XP-214.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson XP-214 to finalize.

Most Epson XP-214 waste counter resets finish in ~1–2 minutes.

Persyaratan Sistem

• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Windows 7/8/10/11 PC
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Koneksi Internet stabil selama pengaturan ulang

Jika Printer Tidak Terdeteksi

• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Jalankan aplikasi sebagai Administrator.
• Gunakan koneksi USB langsung (hindari hub).
• Tutup Epson Status Monitor atau utilitas printer lainnya.

PERTANYAAN YANG SERING DIAJUKAN