Epson WorkForce 40 Waste Ink Counter Reset

The Epson WorkForce 40 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson WorkForce 40 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson WorkForce 40 Show ‘Service Required’?

Kunjungan servis sering kali tidak diperlukan. Wic Reset Connect allows a safe Epson WorkForce 40 waste counter reset in minutes.

Gejala Umum

• ‘Pesan ’Diperlukan Servis' / masa pakai dalam driver atau utilitas
• Kode pemeliharaan/dukungan (bervariasi menurut model/driver)
• Pencetakan berhenti setelah siklus pembersihan
• Peringatan berulang setelah printer dihidupkan ulang

Reset Epson WorkForce 40 Waste Ink Counter in 3 Steps

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson WorkForce 40 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Buka Wic Reset Connect with admin privileges and verify device recognition for Epson WorkForce 40.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson WorkForce 40 to finalize.

Most Epson WorkForce 40 waste counter resets finish in ~1–2 minutes.

Persyaratan Sistem

• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Koneksi Internet stabil selama pengaturan ulang
• Windows 7/8/10/11 PC
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)

Jika Printer Tidak Terdeteksi

• Gunakan koneksi USB langsung (hindari hub).
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Jalankan aplikasi sebagai Administrator.
• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.

PERTANYAAN YANG SERING DIAJUKAN