Epson TX700W Waste Ink Counter Reset

The Epson TX700W is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson TX700W tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson TX700W Waste Ink Counter

Dengan Wic Reset Connect, you can reset the Epson TX700W waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Tanda-tanda Khas

• Printer menolak untuk mencetak meskipun tinta tersedia
• Monitor Status Epson menunjukkan peringatan pemeliharaan
• Lampu berkedip dan pekerjaan terhalang
• Perangkat terkunci hingga pengaturan ulang dilakukan

Reset Epson TX700W Waste Ink Counter in 3 Steps

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson TX700W via USB (Wi-Fi reset is not supported).
2. Langkah 2: Buka Wic Reset Connect with admin privileges and verify device recognition for Epson TX700W.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson TX700W to finalize.

Most Epson TX700W waste counter resets finish in ~1–2 minutes.

Apa yang Anda Butuhkan

• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Koneksi Internet stabil selama pengaturan ulang
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Windows 7/8/10/11 PC

Perbaikan Umum

• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Gunakan koneksi USB langsung (hindari hub).
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Jalankan aplikasi sebagai Administrator.

Pertanyaan yang Sering Diajukan