Panduan reset khusus model

Epson TX659 Reset Waste Ink Counter

When Epson TX659 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.

Kunci reset$8,00
Pengiriman email instanTermasuk dukungan teknisKunci pengganti setelah reset gagal
Masalahnya

The counter behind the Epson TX659 warning

The printer protects against possible ink overflow by monitoring an internal service counter. On Epson TX659, reaching the threshold can trigger an ink pad warning and block further jobs.

Wic Reset Connect dirancang untuk mereset penghitung yang kompatibel pada Epson TX659. Sistem tinta buangan fisik tetap harus diperiksa dan dirawat bila diperlukan.

Windows 7–11PC atau laptop
USB langsungTanpa Wi-Fi atau hub
InternetUntuk validasi kunci
Kunci resetUntuk operasi ini
Langkah demi langkah

Reset the counter in Epson TX659

Mulailah dengan pemeriksaan koneksi di bawah ini, lalu jalankan reset tanpa membuka program printer lain selama proses berlangsung.

  1. Instal driver asli

    Install the official Epson driver for TX659 and confirm that Windows can see the printer.

  2. Hubungkan langsung melalui USB

    Connect Epson TX659 to the computer without Wi-Fi, a hub or an adapter.

  3. Mulai Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson TX659.

  4. Masukkan kunci dan reset

    Masukkan kunci yang dibeli, pilih Reset, dan biarkan printer tetap terhubung hingga selesai.

Selesaikan dengan benar: After the program confirms completion, close it, turn Epson TX659 off for about 10 seconds and switch it on again. The maintenance lock should be cleared.
If Epson TX659 is not detected
  • Hapus pekerjaan cetak yang dijeda dan mulai ulang printer serta Windows jika program lain sedang menggunakan koneksi USB.
  • Jalankan Wic Reset Connect sebagai Administrator dan pastikan koneksi internet tetap aktif selama proses validasi.
  • Install the original Epson driver for TX659; a generic Windows driver may not expose the required communication interface.
  • Hubungkan printer langsung ke komputer. Jangan gunakan Wi-Fi, hub USB, stasiun dok, atau server cetak.

Buka petunjuk lengkap

Pertanyaan umum

Epson TX659 reset FAQ

Berapa lama proses reset berlangsung?

Proses reset itu sendiri biasanya selesai dalam sekitar 1–2 menit setelah printer terdeteksi dengan benar.

Apakah pengaturan ulang membersihkan atau mengganti bantalan tinta?

Tidak. Pengaturan ulang mengubah nilai penghitung yang tersimpan. Periksa, bersihkan, atau ganti sistem tinta limbah fisik jika kondisinya memerlukannya.

Bagaimana jika percobaan pengaturan ulang pertama gagal?

Perbaiki masalah driver atau komunikasi USB terlebih dahulu. Jika kunci telah digunakan, gunakan generator kunci baru atau hubungi dukungan.

Reset dengan percaya diri

Restore Epson TX659

Use the model-specific steps above to reset Epson TX659 with a stable connection and a valid key.

Kunci reset: $8,00
Keranjang Belanja
Pilih mata uang Anda