Model-specific reset guide
Mengatur Ulang Penghitung Tinta Limbah pada Epson R360
If your Epson R360 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Why the ink pad counter blocks Epson R360
Waste ink produced by cleaning cycles is collected inside the printer. Epson R360 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson R360. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson R360
The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.
-
Install the original driver
Install the official Epson driver for R360 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson R360 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson R360.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson R360 is not detected
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Install the original Epson driver for R360; a generic Windows driver may not expose the required communication interface.
Epson R360 reset FAQ
Can I reset Epson R360 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Restore Epson R360
Follow the verified sequence for Epson R360, then restart the printer and continue your work.