Epson P50 Waste Ink Counter Reset

When the Epson P50 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson P50 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson P50 Waste Ink Counter

Dengan Wic Reset Connect, you can reset the Epson P50 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Gejala Umum

Printer menolak untuk mencetak meskipun tinta tersedia
Monitor Status Epson menunjukkan peringatan pemeliharaan
Lampu berkedip dan pekerjaan terhalang
Perangkat terkunci hingga pengaturan ulang dilakukan

Three Steps to Restore Epson P50 Printing

Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson P50 via USB (Wi-Fi reset is not supported).
Langkah 2: Mulai Wic Reset Connect in Administrator mode and wait until Epson P50 appears in the device list.
Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson P50 to finalize.

Beli Kunci Reset ⬇️ Unduh Wic Reset Connect Petunjuk

Most Epson P50 waste counter resets finish in ~1–2 minutes.

Persyaratan Sistem

Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
Tombol reset Wic Reset yang valid Hubungkan tombol reset
Koneksi Internet stabil selama pengaturan ulang
Windows 7/8/10/11 PC

Pertanyaan yang Sering Diajukan

Apakah saya memerlukan pusat layanan?

Biasanya tidak untuk kunci penghitung tinta yang terbuang; pengaturan ulang biasanya sudah cukup.

Bagaimana jika pengaturan ulang tidak berhasil?

Periksa kabel/port USB, jalankan sebagai admin, dan tutup utilitas printer lainnya.

Dapatkah saya mengatur ulang melalui Wi-Fi?

Tidak. Pengaturan ulang memerlukan koneksi USB ke PC Windows.

Berapa lama waktu yang dibutuhkan?

Biasanya sekitar 1-2 menit.

Guide prepared for Epson P50 – Waste Ink Counter Reset using Wic Reset Connect.