Epson P50 Waste Ink Counter Reset

When the Epson P50 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson P50 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson P50 Waste Ink Counter

S Wic Reset Connect, you can reset the Epson P50 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Uobičajeni simptomi

Pisač odbija ispisati čak i kad je tinte dovoljno.
Epson Status Monitor prikazuje upozorenje na održavanje
Treptajuća svjetla i blokirani poslovi
Uređaj je zaključan dok se ne izvrši resetiranje.

Three Steps to Restore Epson P50 Printing

Korak 1: Use a Windows PC (7–11) with Internet access. Connect Epson P50 via USB (Wi-Fi reset is not supported).
Korak 2: Počni Wic Reset Connect in Administrator mode and wait until Epson P50 appears in the device list.
Korak 3: Use the key to reset the counter, wait for completion, then restart Epson P50 to finalize.

Kupite ključ za resetiranje ⬇️ Preuzmite Wic Reset Connect Upute

Most Epson P50 waste counter resets finish in ~1–2 minutes.

Sistemski zahtjevi

Potrebna je USB veza (ne podržava se resetiranje putem Wi-Fi-ja)
Valjani Wic resetni ključ za povezivanje
Stabilna internetska veza tijekom resetiranja
Windows 7/8/10/11 PC

Često postavljana pitanja

Trebam li servisni centar?

Obično nije zbog zaključavanja brojača otpadne tinte; obično je dovoljan reset.

Što ako resetiranje ne uspije?

Provjerite USB kabel/priključak, pokrenite kao administrator i zatvorite ostale uslužne programe za pisač.

Mogu li resetirati putem Wi-Fi-ja?

Ne. Za resetiranje je potrebna USB veza s računalom s operativnim sustavom Windows.

Koliko dugo traje?

Obično oko 1–2 minute.

Guide prepared for Epson P50 – Waste Ink Counter Reset using Wic Reset Connect.