Epson NX330 Waste Ink Counter Reset

If your Epson NX330 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson NX330 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson NX330 Show ‘Service Required’?

Dengan Wic Reset Connect, you can reset the Epson NX330 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Gejala Umum

• ‘Pesan ’Diperlukan Servis' / masa pakai dalam driver atau utilitas
• Kode pemeliharaan/dukungan (bervariasi menurut model/driver)
• Pencetakan berhenti setelah siklus pembersihan
• Peringatan berulang setelah printer dihidupkan ulang

Three Steps to Restore Epson NX330 Printing

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson NX330 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson NX330 is detected.
3. Langkah 3: Masukkan tombol atur ulang dan tekan Atur ulang. Wait ~1–2 minutes, then restart Epson NX330.

Most Epson NX330 waste counter resets finish in ~1–2 minutes.

Apa yang Anda Butuhkan

• Windows 7/8/10/11 PC
• Koneksi Internet stabil selama pengaturan ulang
• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)

Perbaikan Umum

• Jalankan aplikasi sebagai Administrator.
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Gunakan koneksi USB langsung (hindari hub).
• Hidupkan ulang printer dan PC, kemudian coba lagi.