Epson L558 Waste Ink Counter Reset
When the Epson L558 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
A waste ink counter in the Epson L558 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.
Why Does the Epson L558 Show ‘Service Required’?
Most Epson L558 waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.
Bagaimana Kesalahan Muncul
- ‘Pesan ’Diperlukan Servis' / masa pakai dalam driver atau utilitas
- Kode pemeliharaan/dukungan (bervariasi menurut model/driver)
- Pencetakan berhenti setelah siklus pembersihan
- Peringatan berulang setelah printer dihidupkan ulang
Reset Epson L558 Waste Ink Counter in 3 Steps
- Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson L558 via USB (Wi-Fi reset is not supported).
- Langkah 2: Buka Wic Reset Connect with admin privileges and verify device recognition for Epson L558.
- Langkah 3: Rekatkan tombol atur ulang, klik Atur ulang, and after completion power-cycle Epson L558.
Most Epson L558 waste counter resets finish in ~1–2 minutes.
Jika Printer Tidak Terdeteksi
- Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
- Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
- Tutup Epson Status Monitor atau utilitas printer lainnya.
- Jalankan aplikasi sebagai Administrator.
- Hidupkan ulang printer dan PC, kemudian coba lagi.
Guide prepared for Epson L558 – Waste Ink Counter Reset using Wic Reset Connect.