Epson L3250 Waste Ink Counter Reset

When the Epson L3250 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson L3250 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson L3250 Show ‘Service Required’?

Most Epson L3250 waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.

Tanda-tanda Khas

• Printer menolak untuk mencetak meskipun tinta tersedia
• Monitor Status Epson menunjukkan peringatan pemeliharaan
• Lampu berkedip dan pekerjaan terhalang
• Perangkat terkunci hingga pengaturan ulang dilakukan

Epson L3250 Ink Pad Counter Reset – Quick Steps

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson L3250 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson L3250 is detected.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson L3250 to finalize.

Most Epson L3250 waste counter resets finish in ~1–2 minutes.

Sebelum Anda Mulai

• Koneksi Internet stabil selama pengaturan ulang
• Windows 7/8/10/11 PC
• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)

PERTANYAAN YANG SERING DIAJUKAN