Epson L1800 Waste Ink Counter Reset

If your Epson L1800 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson L1800 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson L1800 Show ‘Service Required’?

Most Epson L1800 waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.

Step-by-Step: Epson L1800 Waste Counter Reset

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson L1800 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson L1800 is detected.
3. Langkah 3: Rekatkan tombol atur ulang, klik Atur ulang, and after completion power-cycle Epson L1800.

Most Epson L1800 waste counter resets finish in ~1–2 minutes.

Perbaikan Umum

• Jalankan aplikasi sebagai Administrator.
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Gunakan koneksi USB langsung (hindari hub).
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).