Fix Epson ET-2853 Service Required – Waste Counter Reset

Epson ET-2853 Waste Ink Counter Reset

The Epson ET-2853 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson ET-2853 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson ET-2853 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson ET-2853 waste counter reset in minutes.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Epson ET-2853 Ink Pad Counter Reset – Quick Steps

  1. Step 1: Prepare a Windows PC + USB cable and connect Epson ET-2853 directly. Keep Internet enabled for validation.
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson ET-2853.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson ET-2853 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Petunjuk

Most Epson ET-2853 waste counter resets finish in ~1–2 minutes.

What You Need

  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson ET-2853 – Waste Ink Counter Reset using Wic Reset Connect.

Keranjang Belanja