Fix Epson WF-2651 Service Required – Waste Counter Reset

Epson WF-2651 Waste Ink Counter Reset

When the Epson WF-2651 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson WF-2651 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson WF-2651 Show ‘Service Required’?

Most Epson WF-2651 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Three Steps to Restore Epson WF-2651 Printing

  1. 1. lépés: Connect Epson WF-2651 to a Windows computer with a stable Internet connection using a USB cable.
  2. 2. lépés: Run Wic Reset Connect as Administrator and confirm Epson WF-2651 is detected.
  3. 3. lépés: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson WF-2651.
Buy Reset Key ⬇️ Download Wic Reset Connect Utasítás

Most Epson WF-2651 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson WF-2651 – Waste Ink Counter Reset using Wic Reset Connect.

Bevásárlókocsi