Epson NX115 Waste Ink Counter Reset

The Epson NX115 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson NX115 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson NX115 Waste Ink Counter

With Wic Reset Connect, you can reset the Epson NX115 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Epson NX115 Ink Pad Counter Reset – Quick Steps

1. 1. lépés: Prepare a Windows PC + USB cable and connect Epson NX115 directly. Keep Internet enabled for validation.
2. 2. lépés: Open Wic Reset Connect with admin privileges and verify device recognition for Epson NX115.
3. 3. lépés: Paste the reset key, click Reset, and after completion power-cycle Epson NX115.

Most Epson NX115 waste counter resets finish in ~1–2 minutes.

Before You Begin

• USB connection required (Wi-Fi reset not supported)
• Windows 7/8/10/11 PC
• Stable Internet connection during reset
• Valid Wic Reset Connect reset key

Troubleshooting

• Run the app as Administrator.
• Use a direct USB connection (avoid hubs).
• Temporarily disable VPN/proxy if validation fails.
• Restart printer and PC, then try again.
• Try another USB cable (some cables are charge-only).