Epson ME-510 Waste Ink Counter Reset

Epson ME-510 Waste Ink Counter Reset

The Epson ME-510 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ME-510 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson ME-510 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson ME-510 waste counter reset in minutes.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Epson ME-510 Ink Pad Counter Reset – Quick Steps

  1. 1. lépés: Prepare a Windows PC + USB cable and connect Epson ME-510 directly. Keep Internet enabled for validation.
  2. 2. lépés: Start Wic Reset Connect in Administrator mode and wait until Epson ME-510 appears in the device list.
  3. 3. lépés: Paste the reset key, click Reset, and after completion power-cycle Epson ME-510.
Buy Reset Key ⬇️ Download Wic Reset Connect Utasítás

Most Epson ME-510 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson ME-510 – Waste Ink Counter Reset using Wic Reset Connect.

Bevásárlókocsi