Epson L4268 Waste Ink Counter Reset

Epson L4268 Waste Ink Counter Reset

When the Epson L4268 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L4268 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson L4268 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson L4268 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Epson L4268 Ink Pad Counter Reset – Quick Steps

  1. 1. lépés: Connect Epson L4268 to a Windows computer with a stable Internet connection using a USB cable.
  2. 2. lépés: Start Wic Reset Connect in Administrator mode and wait until Epson L4268 appears in the device list.
  3. 3. lépés: Paste the reset key, click Reset, and after completion power-cycle Epson L4268.
Buy Reset Key ⬇️ Download Wic Reset Connect Utasítás

Most Epson L4268 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)

Troubleshooting

  • Restart printer and PC, then try again.
  • Close Epson Status Monitor or other printer utilities.
  • Try another USB cable (some cables are charge-only).
  • Use a direct USB connection (avoid hubs).
  • Run the app as Administrator.

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson L4268 – Waste Ink Counter Reset using Wic Reset Connect.

Bevásárlókocsi