Epson L4268 Waste Ink Counter Reset

When the Epson L4268 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L4268 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson L4268 Stops Printing (Waste Counter Limit)

Dengan Wic Reset Connect, you can reset the Epson L4268 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Epson L4268 Ink Pad Counter Reset – Quick Steps

1. Langkah 1: Connect Epson L4268 to a Windows computer with a stable Internet connection using a USB cable.
2. Langkah 2: Mulai Wic Reset Connect in Administrator mode and wait until Epson L4268 appears in the device list.
3. Langkah 3: Rekatkan tombol atur ulang, klik Atur ulang, and after completion power-cycle Epson L4268.

Most Epson L4268 waste counter resets finish in ~1–2 minutes.

Sebelum Anda Mulai

• Windows 7/8/10/11 PC
• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Koneksi Internet stabil selama pengaturan ulang
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)

Pemecahan masalah

• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Gunakan koneksi USB langsung (hindari hub).
• Jalankan aplikasi sebagai Administrator.

Pertanyaan yang Sering Diajukan