Epson ET-2600 Waste Ink Counter Reset

The Epson ET-2600 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson ET-2600 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson ET-2600 Stops Printing (Waste Counter Limit)

Most Epson ET-2600 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Epson ET-2600 Ink Pad Counter Reset – Quick Steps

1. 1. lépés: Use a Windows PC (7–11) with Internet access. Connect Epson ET-2600 via USB (Wi-Fi reset is not supported).
2. 2. lépés: Run Wic Reset Connect as Administrator and confirm Epson ET-2600 is detected.
3. 3. lépés: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson ET-2600.

Most Epson ET-2600 waste counter resets finish in ~1–2 minutes.

System Requirements

• Valid Wic Reset Connect reset key
• Stable Internet connection during reset
• Windows 7/8/10/11 PC
• USB connection required (Wi-Fi reset not supported)

Common Fixes

• Restart printer and PC, then try again.
• Use a direct USB connection (avoid hubs).
• Run the app as Administrator.
• Try another USB cable (some cables are charge-only).
• Temporarily disable VPN/proxy if validation fails.

FAQ