Reset Epson EP-708A Waste Ink Counter in Minutes

Epson EP-708A Waste Ink Counter Reset

When the Epson EP-708A reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson EP-708A accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson EP-708A Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson EP-708A waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson EP-708A Ink Pad Counter Reset – Quick Steps

  1. 1. lépés: Connect Epson EP-708A to a Windows computer with a stable Internet connection using a USB cable.
  2. 2. lépés: Open Wic Reset Connect with admin privileges and verify device recognition for Epson EP-708A.
  3. 3. lépés: Use the key to reset the counter, wait for completion, then restart Epson EP-708A to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Utasítás

Most Epson EP-708A waste counter resets finish in ~1–2 minutes.

What You Need

  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset

Frequently Asked Questions

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson EP-708A – Waste Ink Counter Reset using Wic Reset Connect.

Bevásárlókocsi