Model-specific reset guide

Epson C90 Reset Waste Ink Counter

When Epson C90 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.

Visszaállítási gomb$8,00
Instant email deliveryMűszaki támogatás is benne vanReplacement key after a failed reset
The problem

Before resetting Epson C90

The printer protects against possible ink overflow by monitoring an internal service counter. On Epson C90, reaching the threshold can trigger an ink pad warning and block further jobs.

Wic Reset Connect is designed to reset the compatible counter in Epson C90. The physical waste ink system should still be inspected and maintained when necessary.

Windows 7–11PC or laptop
Direct USBNo Wi-Fi or hub
InternetFor key validation
Visszaállítási gombFor this operation
Step by step

Reset the counter in Epson C90

Use the sequence below to establish a stable USB connection and clear the waste ink counter.

  1. Install the original driver

    Install the official Epson driver for C90 and confirm that Windows can see the printer.

  2. Connect directly by USB

    Connect Epson C90 to the computer without Wi-Fi, a hub or an adapter.

  3. Start Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson C90.

  4. Enter the key and reset

    Enter the purchased key, choose Reset and keep the printer connected until completion.

Finish correctly: A successful reset is finalized by switching Epson C90 off and on. The printer should then accept jobs normally.
If Epson C90 is not detected
  • Try another USB port and a known data-capable USB cable if the printer is not detected.
  • Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
  • Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
  • Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.

Open full instructions

Common questions

Epson C90 reset FAQ

Can I reset Epson C90 over Wi-Fi?

No. Wic Reset Connect requires a direct USB connection to the Windows computer.

Does the reset clean or replace the ink pads?

No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.

Does Epson C90 need service mode?

No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.

Reset with confidence

Restore Epson C90

Prepare Epson C90, purchase a reset key and return to printing without an unnecessary service visit.

Reset key: $8,00
Shopping Cart
Válassza ki a pénznemet