Model-specific reset guide
Canon TS9541C Ink Absorber Full Reset
The waste ink system in Canon TS9541C collects ink used during cleaning cycles. Once the estimated limit is reached, service mode and a compatible counter reset may be required.
What the Canon TS9541C service message means
Cleaning operations send unused ink into absorber pads inside the printer. Canon TS9541C estimates their usage with an electronic counter and can lock printing when that value reaches its limit.
Wic Reset Connect is designed to reset the compatible counter in Canon TS9541C. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon TS9541C
- Turn the printer off.
- Nyomja meg és tartsa lenyomva Megállítás/visszaállítás.
- Miközben lenyomva tartja a Stop/Reset gombot, nyomja meg és tartsa lenyomva Teljesítmény.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5 alkalommal.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon TS9541C
Prepare Canon TS9541C before entering the key. A stable service-mode state and direct USB connection are essential.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon TS9541C to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon TS9541C is not detected
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
- Connect Canon TS9541C directly to the computer and try another data-capable USB cable or port.
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
Canon TS9541C reset FAQ
Does the reset clean the ink absorber?
No. It resets the stored counter. Inspect, clean or replace the absorber pads when their physical condition requires maintenance.
Does Canon TS9541C require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
Hányszor kell megnyomni a Stop/Reset gombot?
For Canon TS9541C, use 5 Stop/Reset presses in the sequence shown on this page.
Restore Canon TS9541C
Use the correct sequence for Canon TS9541C and restore printing without an unnecessary service visit.