Vodič za resetiranje specifičan za model
Epson WorkForce 600 Reset Waste Ink Counter
The service-required message on Epson WorkForce 600 often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.
Before resetting Epson WorkForce 600
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson WorkForce 600 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect osmišljen je za resetiranje kompatibilnog brojača u Epson WorkForce 600. Fizički sustav otpadne tinte i dalje treba pregledati i održavati kada je to potrebno.
Reset the counter in Epson WorkForce 600
Prepare the computer and connection first. Most unsuccessful attempts are caused by a missing original driver, an indirect USB connection or another Epson utility using the printer.
-
Instalirajte izvorni upravljački program
Install the official Epson driver for WorkForce 600 and confirm that Windows can see the printer.
-
Povežite izravno putem USB-a
Connect Epson WorkForce 600 to the computer without Wi-Fi, a hub or an adapter.
-
Pokrenite Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WorkForce 600.
-
Unesite ključ i resetirajte
Unesite kupljeni ključ, odaberite Reset i ostavite pisač povezan do završetka postupka.
If Epson WorkForce 600 is not detected
- Povežite pisač izravno s računalom. Nemojte koristiti Wi-Fi, USB razdjelnik, priključnu stanicu ni poslužitelj za ispis.
- Install the original Epson driver for WorkForce 600; a generic Windows driver may not expose the required communication interface.
- Obrišite pauzirane zadatke ispisa i ponovno pokrenite pisač i Windows ako neki drugi program zauzima USB vezu.
- Ako pisač nije prepoznat, pokušajte s drugim USB priključkom i provjerenim USB kabelom koji podržava prijenos podataka.
Epson WorkForce 600 reset FAQ
Čisti li se resetiranjem spremnik s tintom ili se on zamjenjuje?
Ne. Mijenja se pohranjena vrijednost brojača. Pregledajte, očistite ili zamijenite fizički sustav za otpadnu tintu kada to njegovo stanje zahtijeva.
Što ako prvi pokušaj resetiranja ne uspije?
Najprije riješite problem s upravljačkim programom ili USB komunikacijom. Ako je ključ iskorišten, upotrijebite generator novog ključa ili kontaktirajte podršku.
Does Epson WorkForce 600 need service mode?
Ne. Pisači Epson ne koriste sekvencu servisnog načina rada Canon. Povežite pisač uobičajeno putem USB-a.
Restore Epson WorkForce 600
Complete the Epson WorkForce 600 counter reset with Wic Reset Connect and assistance whenever you need it.