Vodič za resetiranje specifičan za model

Epson WF-2761 Reset Waste Ink Counter

When Epson WF-2761 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.

Reset tipka$8,00
Trenutna dostava e-poštomTehnička podrška uključenaZamjenski ključ nakon neuspjelog resetiranja
Problem

What the Epson WF-2761 service message means

Waste ink produced by cleaning cycles is collected inside the printer. Epson WF-2761 tracks those cycles electronically and can stop printing when the calculated limit is reached.

Wic Reset Connect osmišljen je za resetiranje kompatibilnog brojača u Epson WF-2761. Fizički sustav otpadne tinte i dalje treba pregledati i održavati kada je to potrebno.

Windows 7–11Računalo ili prijenosno računalo
Izravni USBBez Wi-Fi-ja ili USB koncentratora
InternetZa provjeru ključa
Reset tipkaZa ovaj postupak
Korak po korak

Reset the counter in Epson WF-2761

The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.

  1. Instalirajte izvorni upravljački program

    Install the official Epson driver for WF-2761 and confirm that Windows can see the printer.

  2. Povežite izravno putem USB-a

    Connect Epson WF-2761 to the computer without Wi-Fi, a hub or an adapter.

  3. Pokrenite Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WF-2761.

  4. Unesite ključ i resetirajte

    Unesite kupljeni ključ, odaberite Reset i ostavite pisač povezan do završetka postupka.

Ispravno dovršite: Finish by closing Wic Reset Connect and restarting Epson WF-2761. A short power-off interval lets the printer reload the updated counter value.
If Epson WF-2761 is not detected
  • Zatvorite Epson Status Monitor i bilo koji drugi Epson softver za održavanje prije pokretanja Wic Reset Connect.
  • Povežite pisač izravno s računalom. Nemojte koristiti Wi-Fi, USB razdjelnik, priključnu stanicu ni poslužitelj za ispis.
  • Ako pisač nije prepoznat, pokušajte s drugim USB priključkom i provjerenim USB kabelom koji podržava prijenos podataka.
  • Install the original Epson driver for WF-2761; a generic Windows driver may not expose the required communication interface.

Otvori potpune upute

Česta pitanja

Epson WF-2761 reset FAQ

Koliko traje resetiranje?

Samo resetiranje obično završi za otprilike 1–2 minute nakon što je pisač ispravno prepoznat.

Can I reset Epson WF-2761 over Wi-Fi?

Ne. Wic Reset Connect zahtijeva izravnu USB vezu s računalom sa sustavom Windows.

Does Epson WF-2761 need service mode?

Ne. Pisači Epson ne koriste sekvencu servisnog načina rada Canon. Povežite pisač uobičajeno putem USB-a.

Resetirajte s povjerenjem

Restore Epson WF-2761

Follow the verified sequence for Epson WF-2761, then restart the printer and continue your work.

Ključ za resetiranje: $8,00
Shopping Cart
Odaberite svoju valutu