Epson RX615 Waste Ink Counter Reset

When the Epson RX615 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson RX615 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson RX615 Show ‘Service Required’?

S Wic Reset Connect, you can reset the Epson RX615 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Tipični znakovi

• Pisač odbija ispisati čak i kad je tinte dovoljno.
• Epson Status Monitor prikazuje upozorenje na održavanje
• Treptajuća svjetla i blokirani poslovi
• Uređaj je zaključan dok se ne izvrši resetiranje.

Epson RX615 Ink Pad Counter Reset – Quick Steps

1. Korak 1: Prepare a Windows PC + USB cable and connect Epson RX615 directly. Keep Internet enabled for validation.
2. Korak 2: Otvoreno Wic Reset Connect with admin privileges and verify device recognition for Epson RX615.
3. Korak 3: Umetnite reset-ključ i kliknite Ponovno pokretanje, and after completion power-cycle Epson RX615.

Most Epson RX615 waste counter resets finish in ~1–2 minutes.

Ako se pisač ne detektira

• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Pokrenite aplikaciju kao administrator.
• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).

Često postavljana pitanja