Epson RX610 Waste Ink Counter Reset

If your Epson RX610 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson RX610 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson RX610 Show ‘Service Required’?

S Wic Reset Connect, you can reset the Epson RX610 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Uobičajeni simptomi

• ‘Potreban servis’ / poruka o vijeku trajanja u upravljačkom programu ili korisničkom sučelju
• Kôd za održavanje/podršku (razlikuje se ovisno o modelu/vozaču)
• Tiskanje se zaustavlja nakon ciklusa čišćenja
• Upozorenje se ponavlja nakon ponovnog pokretanja pisača

Three Steps to Restore Epson RX610 Printing

1. Korak 1: Connect Epson RX610 to a Windows computer with a stable Internet connection using a USB cable.
2. Korak 2: Počni Wic Reset Connect in Administrator mode and wait until Epson RX610 appears in the device list.
3. Korak 3: Unesite svoj ključ za resetiranje i pritisnite Ponovno pokretanje. Wait ~1–2 minutes, then restart Epson RX610.

Most Epson RX610 waste counter resets finish in ~1–2 minutes.

Sistemski zahtjevi

• Potrebna je USB veza (ne podržava se resetiranje putem Wi-Fi-ja)
• Windows 7/8/10/11 PC
• Stabilna internetska veza tijekom resetiranja
• Valjani Wic resetni ključ za povezivanje

Često postavljana pitanja