Vodič za resetiranje specifičan za model

Epson R280 Reset Waste Ink Counter

A waste ink counter warning can prevent Epson R280 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.

Reset tipka$8,00
Trenutna dostava e-poštomTehnička podrška uključenaZamjenski ključ nakon neuspjelog resetiranja
Problem

The counter behind the Epson R280 warning

During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson R280 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.

Wic Reset Connect osmišljen je za resetiranje kompatibilnog brojača u Epson R280. Fizički sustav otpadne tinte i dalje treba pregledati i održavati kada je to potrebno.

Windows 7–11Računalo ili prijenosno računalo
Izravni USBBez Wi-Fi-ja ili USB koncentratora
InternetZa provjeru ključa
Reset tipkaZa ovaj postupak
Korak po korak

Reset the counter in Epson R280

The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.

  1. Instalirajte izvorni upravljački program

    Install the official Epson driver for R280 and confirm that Windows can see the printer.

  2. Povežite izravno putem USB-a

    Connect Epson R280 to the computer without Wi-Fi, a hub or an adapter.

  3. Pokrenite Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson R280.

  4. Unesite ključ i resetirajte

    Unesite kupljeni ključ, odaberite Reset i ostavite pisač povezan do završetka postupka.

Ispravno dovršite: When the success message appears, restart Epson R280. Allow Windows to detect the printer again before sending a test page.
If Epson R280 is not detected
  • Zatvorite Epson Status Monitor i bilo koji drugi Epson softver za održavanje prije pokretanja Wic Reset Connect.
  • Ako pisač nije prepoznat, pokušajte s drugim USB priključkom i provjerenim USB kabelom koji podržava prijenos podataka.
  • Install the original Epson driver for R280; a generic Windows driver may not expose the required communication interface.
  • Povežite pisač izravno s računalom. Nemojte koristiti Wi-Fi, USB razdjelnik, priključnu stanicu ni poslužitelj za ispis.

Otvori potpune upute

Česta pitanja

Epson R280 reset FAQ

Koliko traje resetiranje?

Samo resetiranje obično završi za otprilike 1–2 minute nakon što je pisač ispravno prepoznat.

Can I reset Epson R280 over Wi-Fi?

Ne. Wic Reset Connect zahtijeva izravnu USB vezu s računalom sa sustavom Windows.

Što ako prvi pokušaj resetiranja ne uspije?

Najprije riješite problem s upravljačkim programom ili USB komunikacijom. Ako je ključ iskorišten, upotrijebite generator novog ključa ili kontaktirajte podršku.

Resetirajte s povjerenjem

Restore Epson R280

Ready to restore Epson R280? Check the requirements once more and start the guided reset.

Ključ za resetiranje: $8,00
Shopping Cart
Odaberite svoju valutu