Vodič za resetiranje specifičan za model
Epson L496 resetiranje brojača otpadnog tinta
When Epson L496 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.
Why the ink pad counter blocks Epson L496
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson L496 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect osmišljen je za resetiranje kompatibilnog brojača u Epson L496. Fizički sustav otpadne tinte i dalje treba pregledati i održavati kada je to potrebno.
Reset the counter in Epson L496
Prepare the computer and connection first. Most unsuccessful attempts are caused by a missing original driver, an indirect USB connection or another Epson utility using the printer.
-
Instalirajte izvorni upravljački program
Install the official Epson driver for L496 and confirm that Windows can see the printer.
-
Povežite izravno putem USB-a
Connect Epson L496 to the computer without Wi-Fi, a hub or an adapter.
-
Pokrenite Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L496.
-
Unesite ključ i resetirajte
Unesite kupljeni ključ, odaberite Reset i ostavite pisač povezan do završetka postupka.
If Epson L496 is not detected
- Zatvorite Epson Status Monitor i bilo koji drugi Epson softver za održavanje prije pokretanja Wic Reset Connect.
- Obrišite pauzirane zadatke ispisa i ponovno pokrenite pisač i Windows ako neki drugi program zauzima USB vezu.
- Install the original Epson driver for L496; a generic Windows driver may not expose the required communication interface.
- Pokrenite Wic Reset Connect kao administrator i tijekom cijele provjere održavajte aktivnu internetsku vezu.
Epson L496 reset FAQ
Can I reset Epson L496 over Wi-Fi?
Ne. Wic Reset Connect zahtijeva izravnu USB vezu s računalom sa sustavom Windows.
Što ako prvi pokušaj resetiranja ne uspije?
Najprije riješite problem s upravljačkim programom ili USB komunikacijom. Ako je ključ iskorišten, upotrijebite generator novog ključa ili kontaktirajte podršku.
Koliko traje resetiranje?
Samo resetiranje obično završi za otprilike 1–2 minute nakon što je pisač ispravno prepoznat.
Restore Epson L496
Ready to restore Epson L496? Check the requirements once more and start the guided reset.