Fix Epson L496 Service Required – Waste Counter Reset

Epson L496 Waste Ink Counter Reset

When the Epson L496 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L496 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson L496 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson L496 waste counter reset in minutes.

Common Symptoms

Printer refuses to print even with ink available
Epson Status Monitor shows maintenance warning
Blinking lights and blocked jobs
Device is locked until reset is performed

Reset Epson L496 Waste Ink Counter in 3 Steps

Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson L496 via USB (Wi-Fi reset is not supported).
Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson L496 appears in the device list.
Step 3: Use the key to reset the counter, wait for completion, then restart Epson L496 to finalize.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson L496 waste counter resets finish in ~1–2 minutes.

FAQ

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

How long does it take?

Usually about 1–2 minutes.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson L496 – Waste Ink Counter Reset using Wic Reset Connect.