Fix Epson XP-201 Service Required – Waste Counter Reset

Epson XP-201 Waste Ink Counter Reset

The Epson XP-201 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-201 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson XP-201 Show ‘Service Required’?

Most Epson XP-201 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Three Steps to Restore Epson XP-201 Printing

  1. Étape 1 : Connect Epson XP-201 to a Windows computer with a stable Internet connection using a USB cable.
  2. Étape 2 : Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-201.
  3. Étape 3 : Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-201.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson XP-201 waste counter resets finish in ~1–2 minutes.

What You Need

  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson XP-201 – Waste Ink Counter Reset using Wic Reset Connect.

Panier