Fix Epson WorkForce 435 Service Required – Waste Counter Reset

Epson WorkForce 435 Waste Ink Counter Reset

The Epson WorkForce 435 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson WorkForce 435 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson WorkForce 435 Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson WorkForce 435 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Three Steps to Restore Epson WorkForce 435 Printing

  1. Étape 1 : Prepare a Windows PC + USB cable and connect Epson WorkForce 435 directly. Keep Internet enabled for validation.
  2. Étape 2 : Run Wic Reset Connect as Administrator and confirm Epson WorkForce 435 is detected.
  3. Étape 3 : Paste the reset key, click Reset, and after completion power-cycle Epson WorkForce 435.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson WorkForce 435 waste counter resets finish in ~1–2 minutes.

Troubleshooting

  • Use a direct USB connection (avoid hubs).
  • Try another USB cable (some cables are charge-only).
  • Temporarily disable VPN/proxy if validation fails.
  • Run the app as Administrator.
  • Close Epson Status Monitor or other printer utilities.

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson WorkForce 435 – Waste Ink Counter Reset using Wic Reset Connect.

Panier