How to Reset Epson TX109 Waste Ink Counter

Epson TX109 Waste Ink Counter Reset

If your Epson TX109 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson TX109 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson TX109 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson TX109 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Reset Epson TX109 Waste Ink Counter in 3 Steps

  1. Étape 1 : Prepare a Windows PC + USB cable and connect Epson TX109 directly. Keep Internet enabled for validation.
  2. Étape 2 : Open Wic Reset Connect with admin privileges and verify device recognition for Epson TX109.
  3. Étape 3 : Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson TX109.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson TX109 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson TX109 – Waste Ink Counter Reset using Wic Reset Connect.

Panier