Model-specific reset guide
Epson ME-35 Réinitialiser le compteur d'encre usagée
When Epson ME-35 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.
Why the ink pad counter blocks Epson ME-35
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson ME-35, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson ME-35. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson ME-35
Prepare the computer and connection first. Most unsuccessful attempts are caused by a missing original driver, an indirect USB connection or another Epson utility using the printer.
-
Install the original driver
Install the official Epson driver for ME-35 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson ME-35 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ME-35.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson ME-35 is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Install the original Epson driver for ME-35; a generic Windows driver may not expose the required communication interface.
Epson ME-35 reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Can I reset Epson ME-35 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Restore Epson ME-35
Use the model-specific steps above to reset Epson ME-35 with a stable connection and a valid key.