Model-specific reset guide
Epson L810 Reset Waste Ink Counter
Epson L810 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
Why the ink pad counter blocks Epson L810
An ink pad message is a maintenance safeguard. It indicates that Epson L810 has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect is designed to reset the compatible counter in Epson L810. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson L810
Use the sequence below to establish a stable USB connection and clear the waste ink counter.
-
Install the original driver
Install the official Epson driver for L810 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson L810 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L810.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson L810 is not detected
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Install the original Epson driver for L810; a generic Windows driver may not expose the required communication interface.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
Epson L810 reset FAQ
Does Epson L810 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Can I reset Epson L810 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson L810
Ready to restore Epson L810? Check the requirements once more and start the guided reset.