Reset Epson L201 Waste Ink Counter in Minutes

Epson L201 Waste Ink Counter Reset

The Epson L201 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson L201 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson L201 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson L201 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Three Steps to Restore Epson L201 Printing

  1. Étape 1 : Prepare a Windows PC + USB cable and connect Epson L201 directly. Keep Internet enabled for validation.
  2. Étape 2 : Open Wic Reset Connect with admin privileges and verify device recognition for Epson L201.
  3. Étape 3 : Paste the reset key, click Reset, and after completion power-cycle Epson L201.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson L201 waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson L201 – Waste Ink Counter Reset using Wic Reset Connect.

Panier