Model-specific reset guide
Epson L110 Reset Waste Ink Counter
When Epson L110 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.
The counter behind the Epson L110 warning
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson L110 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect is designed to reset the compatible counter in Epson L110. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson L110
Use the sequence below to establish a stable USB connection and clear the waste ink counter.
-
Install the original driver
Install the official Epson driver for L110 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson L110 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L110.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson L110 is not detected
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
Epson L110 reset FAQ
Can I reset Epson L110 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Does Epson L110 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson L110
A direct USB connection, the correct driver and a valid key are all you need to reset Epson L110.