Epson ET-2802 Waste Ink Counter Reset

Epson ET-2802 Waste Ink Counter Reset

The Epson ET-2802 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2802 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson ET-2802 Stops Printing (Waste Counter Limit)

Most Epson ET-2802 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Reset Epson ET-2802 Waste Ink Counter in 3 Steps

  1. Étape 1 : Prepare a Windows PC + USB cable and connect Epson ET-2802 directly. Keep Internet enabled for validation.
  2. Étape 2 : Start Wic Reset Connect in Administrator mode and wait until Epson ET-2802 appears in the device list.
  3. Étape 3 : Paste the reset key, click Reset, and after completion power-cycle Epson ET-2802.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson ET-2802 waste counter resets finish in ~1–2 minutes.

Common Fixes

  • Run the app as Administrator.
  • Close Epson Status Monitor or other printer utilities.
  • Restart printer and PC, then try again.
  • Try another USB cable (some cables are charge-only).
  • Temporarily disable VPN/proxy if validation fails.

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson ET-2802 – Waste Ink Counter Reset using Wic Reset Connect.

Panier