Model-specific reset guide
Canon TS8352 Ink Absorber Full Reset
The waste ink system in Canon TS8352 collects ink used during cleaning cycles. Once the estimated limit is reached, service mode and a compatible counter reset may be required.
What stops Canon TS8352 from printing
The lock is based on accumulated maintenance activity. Resetting Canon TS8352 changes the counter value but does not remove ink already held in the absorber material.
Wic Reset Connect is designed to reset the compatible counter in Canon TS8352. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon TS8352
- Turn the printer off.
- Appuyer et maintenir Stop/Reset.
- Tout en maintenant la touche Stop/Reset, appuyez et maintenez la touche Puissance.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5 fois.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon TS8352
Prepare Canon TS8352 before entering the key. A stable service-mode state and direct USB connection are essential.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon TS8352 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon TS8352 is not detected
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- Connect Canon TS8352 directly to the computer and try another data-capable USB cable or port.
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
Canon TS8352 reset FAQ
Does the reset clean the ink absorber?
No. It resets the stored counter. Inspect, clean or replace the absorber pads when their physical condition requires maintenance.
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
Does Canon TS8352 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
Restore Canon TS8352
Complete the Canon TS8352 absorber counter reset in a few carefully prepared steps.