Model-specific reset guide
Réinitialisation complète de l'absorbeur d'encre Canon TS8152
Canon TS8152 may block print jobs after recording enough cleaning and maintenance cycles. Use the sequence below to enter service mode and reset the stored value.
What the Canon TS8152 service message means
The lock is based on accumulated maintenance activity. Resetting Canon TS8152 changes the counter value but does not remove ink already held in the absorber material.
Wic Reset Connect is designed to reset the compatible counter in Canon TS8152. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon TS8152
- Turn the printer off.
- Appuyer et maintenir Stop/Reset.
- Tout en maintenant la touche Stop/Reset, appuyez et maintenez la touche Puissance.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5 fois.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon TS8152
Work through the sequence without rushing. Incorrect button timing or a blinking power light means the printer is not ready for the counter reset.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon TS8152 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon TS8152 is not detected
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
- Connect Canon TS8152 directly to the computer and try another data-capable USB cable or port.
Canon TS8152 reset FAQ
Combien de fois dois-je appuyer sur Stop/Reset ?
For Canon TS8152, use 5 Stop/Reset presses in the sequence shown on this page.
Does Canon TS8152 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
Restore Canon TS8152
Follow the verified steps for Canon TS8152, then restart the printer and return to normal operation.