Model-specific reset guide
Canon TS6320 Ink Absorber Full Reset
Canon TS6320 may block print jobs after recording enough cleaning and maintenance cycles. Use the sequence below to enter service mode and reset the stored value.
The waste ink counter inside Canon TS6320
Canon TS6320 uses a stored counter as a maintenance safeguard. Reaching the threshold can produce an Ink Absorber Full, Service Required or related support-code message.
Wic Reset Connect is designed to reset the compatible counter in Canon TS6320. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon TS6320
- Turn the printer off.
- Appuyer et maintenir Stop/Reset.
- Tout en maintenant la touche Stop/Reset, appuyez et maintenez la touche Puissance.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5 fois.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon TS6320
Work through the sequence without rushing. Incorrect button timing or a blinking power light means the printer is not ready for the counter reset.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon TS6320 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon TS6320 is not detected
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
- Connect Canon TS6320 directly to the computer and try another data-capable USB cable or port.
Canon TS6320 reset FAQ
Combien de fois dois-je appuyer sur Stop/Reset ?
For Canon TS6320, use 5 Stop/Reset presses in the sequence shown on this page.
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Restore Canon TS6320
Follow the verified steps for Canon TS6320, then restart the printer and return to normal operation.