Model-specific reset guide
Epson WorkForce 1100 Reset Waste Ink Counter
If your Epson WorkForce 1100 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Before resetting Epson WorkForce 1100
Epson WorkForce 1100 uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.
Wic Reset Connect is designed to reset the compatible counter in Epson WorkForce 1100. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson WorkForce 1100
Prepare the computer and connection first. Most unsuccessful attempts are caused by a missing original driver, an indirect USB connection or another Epson utility using the printer.
-
Install the original driver
Install the official Epson driver for WorkForce 1100 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson WorkForce 1100 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WorkForce 1100.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson WorkForce 1100 is not detected
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Install the original Epson driver for WorkForce 1100; a generic Windows driver may not expose the required communication interface.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
Epson WorkForce 1100 reset FAQ
Does Epson WorkForce 1100 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Can I reset Epson WorkForce 1100 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Restore Epson WorkForce 1100
Complete the Epson WorkForce 1100 counter reset with Wic Reset Connect and assistance whenever you need it.