Model-specific reset guide
Epson TX610FW Reset Waste Ink Counter
Epson TX610FW records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.
The counter behind the Epson TX610FW warning
An ink pad message is a maintenance safeguard. It indicates that Epson TX610FW has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect is designed to reset the compatible counter in Epson TX610FW. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson TX610FW
Correct preparation protects the reset key from being used during a failed communication attempt. Verify each requirement before selecting Reset.
-
Install the original driver
Install the official Epson driver for TX610FW and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson TX610FW to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson TX610FW.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson TX610FW is not detected
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Install the original Epson driver for TX610FW; a generic Windows driver may not expose the required communication interface.
Epson TX610FW reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Does Epson TX610FW need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Can I reset Epson TX610FW over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson TX610FW
Prepare Epson TX610FW, purchase a reset key and return to printing without an unnecessary service visit.