Model-specific reset guide
Epson RX650 Reset Waste Ink Counter
The service-required message on Epson RX650 often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.
Why Epson RX650 stops printing
An ink pad message is a maintenance safeguard. It indicates that Epson RX650 has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect is designed to reset the compatible counter in Epson RX650. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson RX650
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for RX650 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson RX650 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson RX650.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson RX650 is not detected
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
Epson RX650 reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Can I reset Epson RX650 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson RX650
Ready to restore Epson RX650? Check the requirements once more and start the guided reset.