Model-specific reset guide
Epson L3238 tühja tindi loenduri nullimine
Epson L3238 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
Why the ink pad counter blocks Epson L3238
Waste ink produced by cleaning cycles is collected inside the printer. Epson L3238 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson L3238. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson L3238
Correct preparation protects the reset key from being used during a failed communication attempt. Verify each requirement before selecting Reset.
-
Install the original driver
Install the official Epson driver for L3238 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson L3238 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L3238.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson L3238 is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Install the original Epson driver for L3238; a generic Windows driver may not expose the required communication interface.
Epson L3238 reset FAQ
Does Epson L3238 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Can I reset Epson L3238 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson L3238
A direct USB connection, the correct driver and a valid key are all you need to reset Epson L3238.