Model-specific reset guide
Canon TS6080 Ink Absorber Full Reset
An absorber warning on Canon TS6080 does not necessarily mean that the printer is mechanically damaged. The software counter and the physical pads must be considered separately.
What stops Canon TS6080 from printing
The lock is based on accumulated maintenance activity. Resetting Canon TS6080 changes the counter value but does not remove ink already held in the absorber material.
Wic Reset Connect is designed to reset the compatible counter in Canon TS6080. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon TS6080
- Turn the printer off.
- Vajutage ja hoidke all Stopp/tagasi seadistamine.
- Hoidke Stop/Reset all, vajutage ja hoidke all Võimsus.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5 korda.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon TS6080
First make sure the power indicator is steady and no cartridge or mechanical error is active. Then prepare the Windows computer and direct USB connection.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon TS6080 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon TS6080 is not detected
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
- Connect Canon TS6080 directly to the computer and try another data-capable USB cable or port.
Canon TS6080 reset FAQ
Mitu korda peaksin ma vajutama Stop/Reset?
For Canon TS6080, use 5 Stop/Reset presses in the sequence shown on this page.
Does Canon TS6080 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
Restore Canon TS6080
Wic Reset Connect combines a guided reset with support if Canon TS6080 does not respond as expected.