Model-specific reset guide
Canon MG3620 tindi neelduri täielik lähtestamine
If Canon MG3620 displays an ink absorber full or service-required warning, the stored waste ink counter may have reached its limit. This guide covers service mode, USB preparation and the reset itself.
What stops Canon MG3620 from printing
The absorber pads collect ink generated during print-head cleaning. Canon MG3620 tracks those maintenance cycles in memory rather than measuring the pads directly.
Wic Reset Connect is designed to reset the compatible counter in Canon MG3620. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon MG3620
- Turn the printer off.
- Vajutage ja hoidke all Stopp/tagasi seadistamine.
- Hoidke Stop/Reset all, vajutage ja hoidke all Võimsus.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 6 korda.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon MG3620
Service mode must be entered correctly before Wic Reset Connect can communicate with the maintenance interface. Resolve other printer errors first.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon MG3620 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon MG3620 is not detected
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
- Connect Canon MG3620 directly to the computer and try another data-capable USB cable or port.
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
Canon MG3620 reset FAQ
Does Canon MG3620 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
Restore Canon MG3620
Wic Reset Connect combines a guided reset with support if Canon MG3620 does not respond as expected.