Epson XP-410 Waste Ink Counter Reset

When the Epson XP-410 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson XP-410 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson XP-410 Show ‘Service Required’?

Most Epson XP-410 waste ink counter locks are solved by a software counter reset. Wic Reset Connect ofrece un procedimiento sencillo.

Three Steps to Restore Epson XP-410 Printing

1. Paso 1: Connect Epson XP-410 to a Windows computer with a stable Internet connection using a USB cable.
2. Paso 2: Ejecutar Wic Reset Connect as Administrator and confirm Epson XP-410 is detected.
3. Paso 3: Use the key to reset the counter, wait for completion, then restart Epson XP-410 to finalize.

Most Epson XP-410 waste counter resets finish in ~1–2 minutes.

Lo que necesita

• Conexión a Internet estable durante el reinicio
• Requiere conexión USB (no admite restablecimiento Wi-Fi)
• Válido Wic Reset Conectar tecla de reinicio
• Windows 7/8/10/11 PC

Arreglos comunes

• Reinicie la impresora y el PC y vuelva a intentarlo.
• Desactivar temporalmente VPN/proxy si falla la validación.
• Ejecute la aplicación como Administrador.
• Cierre Epson Status Monitor u otras utilidades de la impresora.
• Utiliza una conexión USB directa (evita los concentradores).

Preguntas frecuentes