Epson WorkForce 645 Waste Ink Counter Reset

When the Epson WorkForce 645 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson WorkForce 645 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson WorkForce 645 Show ‘Service Required’?

A menudo no es necesaria una visita de servicio. Wic Reset Connect allows a safe Epson WorkForce 645 waste counter reset in minutes.

Señales típicas

• La impresora se niega a imprimir incluso con tinta disponible
• Epson Status Monitor muestra la advertencia de mantenimiento
• Luces intermitentes y trabajos bloqueados
• El dispositivo está bloqueado hasta que se realiza el reinicio

Reset Epson WorkForce 645 Waste Ink Counter in 3 Steps

1. Paso 1: Use a Windows PC (7–11) with Internet access. Connect Epson WorkForce 645 via USB (Wi-Fi reset is not supported).
2. Paso 2: Abrir Wic Reset Connect with admin privileges and verify device recognition for Epson WorkForce 645.
3. Paso 3: Introduzca su clave de reinicio y pulse Restablecer. Wait ~1–2 minutes, then restart Epson WorkForce 645.

Most Epson WorkForce 645 waste counter resets finish in ~1–2 minutes.

Antes de empezar

• Válido Wic Reset Conectar tecla de reinicio
• Windows 7/8/10/11 PC
• Conexión a Internet estable durante el reinicio
• Requiere conexión USB (no admite restablecimiento Wi-Fi)

PREGUNTAS FRECUENTES