Reset Epson WF-3723 Waste Ink Counter in Minutes

Epson WF-3723 Waste Ink Counter Reset

The Epson WF-3723 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson WF-3723 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson WF-3723 Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson WF-3723 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Reset Epson WF-3723 Waste Ink Counter in 3 Steps

  1. Paso 1: Connect Epson WF-3723 to a Windows computer with a stable Internet connection using a USB cable.
  2. Paso 2: Start Wic Reset Connect in Administrator mode and wait until Epson WF-3723 appears in the device list.
  3. Paso 3: Paste the reset key, click Reset, and after completion power-cycle Epson WF-3723.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrucciones

Most Epson WF-3723 waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson WF-3723 – Waste Ink Counter Reset using Wic Reset Connect.

Carro de la compra